Cisco TelePresence C20 Installation Sheet

Installing Cisco TelePresence System Quick Set C20
Quick Set C20 components About the cameras
•
Codec C20 The PrecisionHD 1080p 12X camera comes
with a lens hood. The use of this lens hood
•
Camera options
will prevent stray light from disturbing your
A: PrecisionHD 1080p 12X camera
video experience.
B: PrecisionHD 1080p 4X camera
•
Table Microphone 20
•
Remote control
Accessories:
•
3 × HDMI cable for screen and camera connectivity
•
Ethernet cable for LAN
•
VGA to DVI-A cable for PC connectivity
•
Camera cable
•
Power supply
•
Camera mounting bracket
In addition to the Quick Set C20 you must provide a
monitor or projector, and a loudspeaker (external or
built-in to the monitor) to complete your video system.
User guides
The user documentation for this product, including
compliance and safety information, is available online.
Go to: http://www.cisco.com/go/telepresence/docs
and navigate to your product in the right pane; start by
selecting TelePresence Solutions Platform.
78-19784-02 Quick Set C20 Installation Sheet | February 2012 | © 2010-2012 Cisco Systems, Inc. All rights reserved.
Connecting the PrecisionHD 1080p 12X camera
CAUTION
In order to be able
to use the system
for video calls, all
orange colored
sockets must be
connected.
Make sure all
units are switched
off whenever
PrecisionHD 1080p 12X camera
connecting or
shown with the lens hood mounted.
disconnecting
devices.
PrecisionHD 1080p 4X camera
requires no lens hood.
The camera mounting bracket
should be mounted so that the
camera gets positioned on top
of your monitor to enhance the
perceived eye contact.
Connecting the PrecisionHD 1080p 4X camera
CAUTION
In order to be able
to use the system
for video calls, all
orange colored
sockets must be
connected.
Make sure all
units are switched
off whenever
connecting or
disconnecting
devices.
Page 1