Cisco TelePresence System Codec C20 Reference Manual page 157

Cisco TelePresence System Codec C20
Contents Introduction
xStatus Network CDP Version
Returns information about the software release version the switch is running.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Version
*s Network 1 CDP Version: "Cisco IOS Software, C3750E Software (C3750E-
UNIVERSALK9-M), Version 15.0(1)SE2, RELEASE SOFTWARE (fc3)*Technical Support:
http://www.cisco.com/techsupport*Copyright (c) 1986-2011 by Cisco Systems,
Inc.*Compiled Thu 22-Dec-11 00:05 by prod _ rel _ team"
** end
xStatus Network CDP Capabilities
Describes the functional capability for the switch in form of a device type. See documentation for
CDP protocol for more information.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Capabilities
*s Network 1 CDP Capabilities: "0x0029"
** end
xStatus Network CDP DeviceId
Identifies the name of the switch in form of a character string.
Value space of the result returned:
<String>
Example:
xStatus Network CDP DeviceId
*s Network 1 CDP DeviceId: "123456.company.com"
** end
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
xStatus Network CDP PortID
xStatus Network CDP Duplex
xStatus Network CDP VTPMgmtDomain
xStatus Network CDP Address
157
xCommand
Returns the identification the switch uses of the port the endpoint is connected to.
Value space of the result returned:
<String>
Example:
xStatus Network CDP PortID
*s Network 1 CDP PortID: "GigabitEthernet1/0/23"
** end
Indicates the status (duplex configuration) of the CDP broadcast interface. Used by network
operators to diagnose connectivity problems between adjacent network elements.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Duplex
*s Network 1 CDP Duplex: "Full"
** end
Returns the switch's configured VTP management domain name-string.
Value space of the result returned:
<String>
Example:
xStatus Network CDP VTPMgmtDomain
*s Network 1 CDP VTPMgmtDomain: "anyplace"
** end
Returns the first network address of both receiving and sending devices.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Address
*s Network 1 CDP Address: "192.0.1.20"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.