Cisco TelePresence System Codec C20 Reference Manual page 48

Cisco TelePresence System Codec C20
Contents Introduction
xConfiguration NetworkServices SNMP SystemContact
Enter the name of the Network Services SNMP System Contact.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: xConfiguration NetworkServices SNMP SystemContact: ""
xConfiguration NetworkServices SNMP SystemLocation
Enter the name of the Network Services SNMP System Location.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: xConfiguration NetworkServices SNMP SystemLocation: ""
xConfiguration NetworkServices SSH Mode
SSH (or Secure Shell) protocol can provide secure encrypted communication between the codec
and your local computer.
Requires user role: ADMIN
Value space: <Off/On>
Off: The SSH protocol is disabled.
On: The SSH protocol is enabled.
Example: xConfiguration NetworkServices SSH Mode: On
xConfiguration NetworkServices SSH AllowPublicKey
Secure Shell (SSH) public key authentication can be used to access the codec.
Requires user role: ADMIN
Value space: <Off/On>
Off: The SSH public key is not allowed.
On: The SSH public key is allowed.
Example: xConfiguration NetworkServices SSH AllowPublicKey: On
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration xConfiguration
xConfiguration NetworkServices CTMS Mode
xConfiguration NetworkServices CTMS Encryption
48
xCommand
This setting determines whether or not to allow multiparty conferences controlled by a Cisco
TelePresence Multipoint Switch (CTMS).
Video systems running software TC5.0 or later are able to initiate or join non-encrypted multiparty
conferences controlled by CTMS version 1.8 or later. Encrypted conferences are supported as from
software versions TC6.0 and CTMS 1.9.1. Encryption is addressed in the NetworkServices CTMS
Encryption setting.
Requires user role: ADMIN
Value space: <Off/On>
Off: Mulitparty conferencing via CTMS is prohibited.
On: Mulitparty conferencing via CTMS is allowed.
Example: xConfiguration NetworkServices CTMS Mode: On
This setting indicates whether or not the video system supports encryption when participating in a
multiparty meeting controlled by a Cisco TelePresence Multipoint Switch (CTMS).
CTMS allows three security settings for meetings: non-secure (not encrypted), best effort
(encrypted if all participants support encryption, otherwise not encrypted) and secure (always
encrypted).
Requires user role: ADMIN
Value space: <Off/BestEffort>
Off: The video system does not allow encryption and therefore cannot participate in a secure
CTMS meeting (encrypted). When participating in a best effort CTMS meeting, the meeting will be
downgraded to non-secure (not encrypted).
BestEffort: The video system can negotiate encryption parameters with CTMS and participate in a
secure CTMS meeting (encrypted). Do not use this value if the CTMS version is older than 1.9.1.
Example: xConfiguration NetworkServices CTMS Encryption: Off
API Reference Guide
xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.