Cisco TelePresence System Codec C20 Reference Manual page 177

Cisco TelePresence System Codec C20
Contents Introduction
xStatus SystemUnit Diagnostics LastRun
Shows when the SystemUnit diagnostics was last run on the codec.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Diagnostics LastRun
*s SystemUnit Diagnostics LastRun: "2012-08-17, 16:23:27"
** end
xStatus SystemUnit Diagnostics Message Type
Returns information on the results of the latest diagnostics on the system.
Value space of the result returned:
<ValidAdminPassword/CamerasDetected/H320GatewayStatus/ISDNLinkCompatibility/
SIPProfileRegistration/SIPListenPortAndOutboundMode/TLSVerifyRequiredCerts/
DefaultCallProtocolRegistered/NetSpeedAutoNegotiated/HasValidReleaseKey/
EthernetDuplexMatches/IPv4Assignment/IPv6Assignment/SIPProfileType/CallProtocolIPStack
PlatformCompatability/CameraStatus/CameraPairing/CameraSoftwareVersion/SelectedVideo
InputSourceConnected/OSDVideoOutput/VideoFromInternalCamera/H323GatekeeperStatus/
SipIceAndAnatConflict/UdpPortRangeViolation/ProvisioningStatus/CallProtocolVcsProvisioningC
ompatibility/CallProtocolDualStackConfig>
Example:
xStatus SystemUnit Diagnostics Message type
*s SystemUnit Diagnostics Message 1 Type: InvalidAdminPassword
** end
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
xStatus SystemUnit Diagnostics Message Level
xStatus SystemUnit Diagnostics Message Description
xStatus SystemUnit Diagnostics Message References
177
xCommand
Returns information on the level of the diagnostics message.
Error: There is an error in the system. The system can still be used, but there can be some
restrictions.
Warning: A problem is detected and a more specific report follows indicating the exact problem.
Critical: The warning level is critical. The system cannot be used.
Value space of the result returned:
<Error/Warning/Critical>
Example:
xStatus SystemUnit Diagnostics Message Level
*r Status (status=Error):
Reason: No match on address expression
XPath: Status/SystemUnit/Diagnostics/Message/Level
** end
A description of the current diagnostics alerts.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Diagnostics Message Description
*s SystemUnit DiagnosticsResult Message 1 Description: "IP configuration
incomplete"
** end
Additional information on the diagnostics alert, if available.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Diagnostics Message References
*s SystemUnit DiagnosticsResult Message 1 References: ""
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.