Cisco TelePresence System Codec C20 Reference Manual page 182

Cisco TelePresence System Codec C20
Contents Introduction
xStatus Video Output HDMI [1, 2] Connected
Indicates whether a display is connected to the HDMI video output or not. NOTE: When a display
enters standby mode, the endpoint may not be able to detect it. The connector status will then
return False/Unknown even if the display is physically connected.
True - A display is connected to the video output connector.
False - No display is connected to the video output.
Value space of the result returned:
<True/False>
Example:
xStatus Video Output HDMI Connected
*s Video Output HDMI 1 Connected: False
** end
xStatus Video Layout
Shows the top level overview of the video layout status.
xStatus Video Layout Mode
Indicates type of layout currently used by the codec, custom or default.
Value space of the result returned:
<Default/Custom>
Example:
xStatus Video Layout Mode
*s Video Layout Mode: Default
** end
xStatus Video Layout PresentationView
Returns information about the presentation view mode.
Value space of the result returned:
<Default/Maximized/Minimized>
Example:
xStatus Video Layout PresentationView
*s Video Layout PresentationView: "Default"
** end
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
xStatus Video Layout Site [n] Output [1..2] FamilyName
xStatus Video Layout Site [n] Output [1..2] FullFamilyName
xStatus Video Layout Site [n] Output [1..2] GraphicName
182
xCommand
Shows the name of the video layout family.
Value space of the result returned:
<String>
Example:
xStatus Video Layout Site 1 Output 1 FamilyName
*s Video Layout Site 1 Output 1 FamilyName: "fullscreen"
** end
Shows the name, included information about self-view on/off, for the video layout family.
Value space of the result returned:
<String>
Example:
xStatus Video Layout Site 1 Output 1 FullFamilyName
*s Video Layout Site 1 Output 1 FullFamilyName: "fullscreen-local-single-camctrl"
** end
Shows the name of the graphic layout. The name identifies the layout used right now at the
specified output.
NOTE: Note that while the FamilyName is constant as the long as the configurations on the system
does not change, the GraphicName varies depending on system state (the number of participants
for instance).
Value space of the result returned:
<String>
Example:
xStatus Video Layout Site 1 Output 1 GraphicName
*s Video Layout Site 1 Output 1 GraphicName: "full-pip"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.