Cisco TelePresence System Codec C20 Reference Manual page 47

Cisco TelePresence System Codec C20
Contents Introduction
xConfiguration NetworkServices HTTPS OCSP URL
Specify the URL of the OCSP responder (server) that will be used to check the certificate status.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example: xConfiguration NetworkServices HTTPS OCSP URL: "http://ocspserver.company.
com:81"
xConfiguration NetworkServices NTP Mode
The Network Time Protocol (NTP) is used to synchronize the time of the system to a reference time
server. The time server will subsequently be queried every 24th hour for time updates. The time
will be displayed on the top of the screen. The system will use the time to timestamp messages
transmitted to Gatekeepers or Border Controllers requiring H.235 authentication. The system will
use the time to timestamp messages transmitted to Gatekeepers or Border Controllers that requires
H.235 authentication. It is also used for timestamping Placed Calls, Missed Calls and Received
Calls.
Requires user role: ADMIN
Value space: <Auto/Off/Manual>
Auto: The system will use the NTP server, by which address is supplied from the DHCP server in
the network. If no DHCP server is used, or the DHCP server does not provide the system with a
NTP server address, the system will use the static defined NTP server address specified by the
user.
Off: The system will not use an NTP server.
Manual: The system will always use the static defined NTP server address specified by the user.
Example: xConfiguration NetworkServices NTP Mode: Manual
xConfiguration NetworkServices NTP Address
Enter the NTP Address to define the network time protocol server address. This address will be
used if NTP Mode is set to Manual, or if set to Auto and no address is supplied by a DHCP server.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: A valid IPv4 address, IPv6 address or DNS name.
Example: xConfiguration NetworkServices NTP Address: "1.ntp.tandberg.com"
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration xConfiguration
xConfiguration NetworkServices SNMP Mode
xConfiguration NetworkServices SNMP Host [1..3] Address
xConfiguration NetworkServices SNMP CommunityName
47
xCommand
SNMP (Simple Network Management Protocol) is used in network management systems to monitor
network-attached devices (routers, servers, switches, projectors, etc) for conditions that warrant
administrative attention. SNMP exposes management data in the form of variables on the managed
systems, which describe the system configuration. These variables can then be queried (set to
ReadOnly) and sometimes set (set to ReadWrite) by managing applications.
Requires user role: ADMIN
Value space: <Off/ReadOnly/ReadWrite>
Off: Disable the SNMP network service.
ReadOnly: Enable the SNMP network service for queries only.
ReadWrite: Enable the SNMP network service for both queries and commands.
Example: xConfiguration NetworkServices SNMP Mode: ReadWrite
Enter the address of up to three SNMP Managers.
The system's SNMP Agent (in the codec) responds to requests from SNMP Managers (a PC
program etc.), for example about system location and system contact. SNMP traps are not
supported.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: A valid IPv4 address, IPv6 address or DNS name.
Example: xConfiguration NetworkServices SNMP Host 1 Address: ""
Enter the name of the Network Services SNMP Community. SNMP Community names are used
to authenticate SNMP requests. SNMP requests must have a password (case sensitive) in order
to receive a response from the SNMP Agent in the codec. The default password is "public". If
you have the Cisco TelePresence Management Suite (TMS) you must make sure the same SNMP
Community is configured there too. NOTE: The SNMP Community password is case sensitive.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: xConfiguration NetworkServices SNMP CommunityName: "public"
API Reference Guide
xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.