Cisco TelePresence System Codec C20 Reference Manual page 155

Cisco TelePresence System Codec C20
Contents Introduction
xStatus Network 1 IPv4 SubnetMask
Shows the subnet mask which determines which subnet an IPv4 address belongs to.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 SubnetMask
*s Network 1 IPv4 SubnetMask: "255.255.255.0"
** end
xStatus Network 1 IPv4 Gateway
Shows the address of the IPv4 gateway.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 Gateway
*s Network 1 IPv4 Gateway: "192.0.2.10"
** end
xStatus Network 1 IPv4 DNS Domain Name
Shows the domain name.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 DNS Domain Name
*s Network 1 IPv4 DNS Domain Name: "www.example.com www.example.int"
** end
xStatus Network 1 IPv4 DNS Server [1..5] Address
Shows the IP address of the DNS server.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 DNS Server 1. Address
*s Network 1 IPv4 DNS Server 1 Address: "192.0.2.60"
** end
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
xStatus Network 1 IPv4 DHCP TftpServerAddress
xStatus Network 1 IPv4 DHCP TmsServer
xStatus Network 1 IPv4 DHCP ProvisioningServer
155
xCommand
Returns the IP address of the TFTP server (provisioning server) as assigned by DHCP, provided that
the DHCP server supports option 150. This status is used only when xConfiguration Provisioning
Mode is CUCM.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 DHCP TftpServerAddress
*s Network 1 IPv4 DHCP TftpServerAddress: "192.0.2.0"
** end
Returns the IP address of the TMS server (provisioning server) as assigned by DHCP, provided that
the DHCP server supports option 242. This status is used only when xConfiguration Provisioning
Mode is TMS.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 DHCP TmsServer
*s Network 1 IPv4 DHCP TmsServer: "192.0.2.0"
** end
Returns the IP address of the VCS provisioning server as assigned by DHCP, provided the
provisioning server address is defined as a vendor encapsulated option in the DHCP server. This
status is used only when xConfiguration Provisioning Mode is VCS.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 DHCP ProvisioningServer
*s Network 1 IPv4 DHCP ProvisioningServer: "192.0.2.0"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.