Cisco TelePresence System Codec C20 Reference Manual page 140

Cisco TelePresence System Codec C20
Contents Introduction
xStatus Diagnostics Call [n] Channels IncomingAudioChannel [n] Netstat 1 MaxJitter
xStatus Diagnostics Call [n] Channels IncomingVideoChannel [n] Netstat 1 MaxJitter
xStatus Diagnostics Call [n] Channels IncomingDataChannel [n] Netstat 1 MaxJitter
xStatus Diagnostics Call [n] Channels OutgoingAudioChannel [n] Netstat 1 MaxJitter
xStatus Diagnostics Call [n] Channels OutgoingVideoChannel [n] Netstat 1 MaxJitter
xStatus Diagnostics Call [n] Channels OutgoingDataChannel [n] Netstat 1 MaxJitter
Shows the maximum jitter that has been measured during last time interval (5 seconds).
Value space of the result returned:
<Integer>
Example:
xStatus Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1 MaxJitter
*s Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1 MaxJitter: 0
** end
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
H320 status
xStatus H320 Gateway Status
xStatus H320 Gateway Address
xStatus H320 Gateway Number
140
xCommand
Returns the state of the H320 Gateway, if the codec is paired with an ISDN Link.
Value space of the result returned:
<OK/OKWithWarning/Error/Inactive/Warning>
Example:
xStatus H320 Gateway status
*s H320 Gateway Status: Error
** end
Returns the IPv4 address of the ISDN Gateway, if the endpoint is paired to one.
Value space of the result returned:
<OK/OKWithWarning/Error/Inactive>
Example:
xStatus H320 Gateway Status
*s H320 Gateway Status: Inactive
** end
Returns the IPv6 address of the ISDN Gateway if the endpoint is paired to one.
Value space of the result returned:
<String>
Example:
xStatus H320 Gateway Number
*s H320 Gateway Number: ""
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.