Cisco TelePresence System Codec C20 Reference Manual page 37

Cisco TelePresence System Codec C20
Contents Introduction
xConfiguration H323 Profile [1..1] Authentication Mode
Set the authenticatin mode for the H.323 profile.
Requires user role: ADMIN
Value space: <Off/On>
Off: If the H.323 Gatekeeper Authentication Mode is set to Off the system will not try to
authenticate itself to a H.323 Gatekeeper, but will still try a normal registration.
On: If the H.323 Gatekeeper Authentication Mode is set to On and a H.323 Gatekeeper indicates
that it requires authentication, the system will try to authenticate itself to the gatekeeper. NOTE:
Requires the Authentication LoginName and Authentication Password to be defined on both the
codec and the Gatekeeper.
Example: xConfiguration H323 Profile 1 Authentication Mode: Off
xConfiguration H323 Profile [1..1] Authentication LoginName
The system sends the Authentication Login Name and the Authentication Password to a H.323
Gatekeeper for authentication. The authentication is a one way authentication from the codec to
the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper
indicates that no authentication is required, the system will still try to register. NOTE: Requires the
H.323 Gatekeeper Authentication Mode to be enabled.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: xConfiguration H323 Profile 1 Authentication LoginName: ""
xConfiguration H323 Profile [1..1] Authentication Password
The system sends the Authentication Login Name and the Authentication Password to a H.323
Gatekeeper for authentication. The authentication is a one way authentication from the codec to
the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper
indicates that no authentication is required, the system will still try to register. NOTE: Requires the
H.323 Gatekeeper Authentication Mode to be enabled.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: xConfiguration H323 Profile 1 Authentication Password: ""
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration xConfiguration
xConfiguration H323 Profile [1..1] CallSetup Mode
xConfiguration H323 Profile [1..1] Gatekeeper Discovery
xConfiguration H323 Profile [1..1] Gatekeeper Address
37
xCommand
The H.323 Call Setup Mode defines whether to use a Gatekeeper or Direct calling when establishing
H323 calls.
NOTE: Direct H.323 calls can be made even though the H.323 Call Setup Mode is set to
Gatekeeper.
Requires user role: ADMIN
Value space: <Direct/Gatekeeper>
Direct: An IP address must be used when dialing in order to make the H323 call.
Gatekeeper: The system will use a Gatekeeper to make a H.323 call. When selecting this option
the H323 Profile Gatekeeper Address and H323 Profile Gatekeeper Discovery settings must also
be configured.
Example: xConfiguration H323 Profile 1 CallSetup Mode: Gatekeeper
Determine how the system shall register to a H.323 Gatekeeper.
Requires user role: ADMIN
Value space: <Manual/Auto>
Manual: The system will use a specific Gatekeeper identified by the Gatekeeper's IP address.
Auto: The system will automatically try to register to any available Gatekeeper. If a Gatekeeper
responds to the request sent from the codec within 30 seconds this specific Gatekeeper will
be used. This requires that the Gatekeeper is in auto discovery mode as well. If no Gatekeeper
responds, the system will not use a Gatekeeper for making H.323 calls and hence an IP address
must be specified manually.
Example: xConfiguration H323 Profile 1 Gatekeeper Discovery: Manual
Enter the IP address of the Gatekeeper. NOTE: Requires the H.323 Call Setup Mode to be set to
Gatekeeper and the Gatekeeper Discovery to be set to Manual.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: A valid IPv4 address, IPv6 address or DNS name.
Example: xConfiguration H323 Profile 1 Gatekeeper Address: "192.0.2.0"
API Reference Guide
xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.