Cisco TelePresence System Codec C20 Reference Manual page 173

Cisco TelePresence System Codec C20
Contents Introduction
xStatus SystemUnit Software OptionKeys NaturalPresenter
Shows if the system has the option key installed that supports the NaturalPresenter functionality.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Software OptionKeys NaturalPresenter
*s SystemUnit Software OptionKeys NaturalPresenter: "true"
** end
xStatus SystemUnit Software OptionKeys PremiumResolution
Shows if the system has the option key installed that supports the PremiumResolution functionality.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Software OptionKeys PremiumResolution
*s SystemUnit Software OptionKeys PremiumResolution: "true"
** end
xStatus SystemUnit Software OptionKeys HighDefinition
Shows if the system has the option key installed that supports the HighDefinition functionality.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Software OptionKeys HighDefinition
*s SystemUnit Software OptionKeys HighDefinition: "true"
** end
xStatus SystemUnit Software OptionKeys DualDisplay
Shows if the system has the option key installed that supports the DualDisplay functionality.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Software OptionKeys DualDisplay
*s SystemUnit Software OptionKeys DualDisplay: "true"
** end
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
xStatus SystemUnit Hardware Module SerialNumber
xStatus SystemUnit Hardware Module Identifier
xStatus SystemUnit Hardware Module CompatibilityLevel
173
xCommand
Shows the serial number of the hardware module in the codec.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Hardware Module SerialNumber
*s SystemUnit Hardware Module SerialNumber: "F9AA99A00090"
** end
Shows the revision of the hardware module in the codec.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Hardware Module Identifier
*s SystemUnit Hardware Module Identifier: "1"
** end
The Cisco TelePresence endpoints are using a NAND flash memory for general storage. The
endpoints running TC software are manufactured with a new version of the flash memory. Endpoints
having the new version of the flash memory must run software TC4.2.1 or later. Some previous TC
software versions are updated to support the new flash memory. Please check the release note
to find if the new version of the flash memory is supported. If your endpoint does not have the
CompatibilityLevel command it does not have the new flash memory installed.
The result returned when running the command is either 0 or 1:
0 = The system does not have the new flash memory installed.
1 = The system has the new flash memory installed. If downgraded, it can only be downgraded to
previous TC software versions having support for the new version of the flash memory.
Value space of the result returned:
<"1"/"0">
Example:
xStatus SystemUnit Hardware Module CompatibilityLevel
*s SystemUnit Hardware Module CompatibilityLevel: 1
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.