Cisco TelePresence System Codec C20 Reference Manual page 186

Cisco TelePresence System Codec C20
Contents Introduction
xStatus Video Selfview FullscreenMode
Shows whether selfview is set on full screen mode or not.
Value space of the result returned:
<On/Off>
Example:
xStatus Video Selfview FullscreenMode
*s Video Selfview FullscreenMode: Off
** end
xStatus Video Selfview PIPPosition
Shows the position of the selfview image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
Example:
xStatus Video Selfview PIPPosition
*s Video Selfview PIPPosition: LowerRight
** end
xStatus Video Selfview OnMonitorRole
Identifies which monitor(s) contains the selfview, if present.
Value space of the result returned:
<First/Second/Third/Fourth>
Example:
xStatus Video Selfview OnMonitorRole
*s Video Selfview OnMonitorRole: First
** end
xStatus Video PIP ActiveSpeaker Position
Shows the position of the active speaker's image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
Example:
xStatus Video PIP ActiveSpeaker Position
*s Video PIP ActiveSpeaker Position: UpperCenter
** end
Codec C20 API Reference Guide TC7.0, JANUARY 2014.
D14869.11
About the API xConfiguration
xStatus Video PIP Presentation Position
xStatus Video OSD Output
xStatus Video OSD Mode
186
xCommand
Shows the position of the presentation image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
Example:
xStatus Video PIP Presentation Position
*s Video PIP Presentation Position: CenterLeft
** end
Indicates which monitor is used for on-screen display output.
Value space of the result returned:
<Integer>
Example:
xStatus Video OSD Output
*s Video OSD Output: 3
** end
Indicates whether on-screen display in indicator or full mode.
Indicators: The on-screen display is in passive mode when a Touch controller is paired to the
system.
Full: Full on—screen display menu is active and can be controlled with a remote control.
Value space of the result returned:
<Indicators/Full>
Example:
xStatus Video OSD Mode
*s Video OSD Mode: Full
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.