Replacing The Battery - Cisco SCE 1000 Installation And Configuration Manual

Replacing the Battery

Replacing the Battery
The SCE 1000 has a lithium battery on its main circuit board. When the battery loses its charge,
call Cisco Technical Support to replace the battery.
Do not attempt to replace this battery yourself
Warning
There is danger of explosion if the lithium battery is incorrectly replaced. Replace only with the same
Warning
or equivalent type recommended by the manufacturer. Dispose of used batteries according to the
manufacturer's instructions.
Cisco SCE 1000 2xGBE Installation and Configuration Guide
4-22
Chapter 4 Installation and Maintenance
OL-7821-04