Attaching The Brackets To The Sce - Cisco SCE 1000 Installation And Configuration Manual

Chapter 4 Installation and Maintenance

Attaching the Brackets to the SCE 1000

Before installing the SCE 1000 in the rack, you must first install an appropriate rack-mount
bracket on each side of the front of the SCE 1000, as illustrated in the following figure. See
and Parts Required
rack–mount.
To install the rack-mount brackets on the SCE 1000 chassis, complete the following steps:
Align the rack-mount bracket to the side of the SCE 1000. Choose the proper bracket for your
Step 1
installation (2-post rack or 4-post rack) as illustrated in
("Rack-Mounting a SCE 1000
Step 2 Insert and tighten three screws.
Figure 4-4: Attaching the Mounting Brackets (4-post)
Figure 4-5: Attaching the Mounting Brackets (2-post)
Step 3 Repeat steps 1 and 2 on the other side of the SCE 1000.
This completes the steps for attaching the rack-mount brackets to the SCE 1000.
If mounting the SCE 1000 in a rack with only two posts, skip to
(Mounting the System to a Rack
If mounting the SCE 1000 in a rack with four posts, proceed to the next step to attach the crossrail
supports to the rack.
OL-7821-04
(on page 4-2) for a listing of the parts and tools required for installing the
Platform" on page 4-6).
"Mounting the System to the
Cisco SCE 1000 2xGBE Installation and Configuration Guide
Installing the SCE 1000 Platform
Rack-Mounting a SCE 1000
Mounting the System to a Rack
Rack" on page 4-9).
Tools
Platform
4-7