Configuring Dmz Wan Rules - NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual

ProSafe VPN Firewall 200 FVX538 Reference Manual

Configuring DMZ WAN Rules

The firewall rules for traffic between the DMZ and the WAN/Internet are configured on the DMZ
WAN Rules screen. The Default Outbound Policy is to allow all traffic from and to the Internet to
pass through. Firewall rules can then be applied to block specific types of traffic from either going
out from the DMZ to the Internet (outbound) or coming in from the Internet to the DMZ
(inbound). The default outbound policy can be changed to block all outbound traffic and enable
only specific services to pass through the VPN firewall by adding an outbound services rule.
To create a new DMZ WAN outbound service policy:
1. Select Security from the main menu and Firewall Rules from the submenu. The LAN WAN
Rules screen will display.
2. Select the DMZ WAN Rules tab. The DMZ WAN Rules screen will display.
Figure 4-5
3. Click Add under the Outbound Services table. The Add DMZ WAN Outbound Services
screen will display (see
4-12
Figure 4-6 on page 4-13).
v1.0, January 2010
Firewall Protection and Content Filtering