NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 109

Follow these steps to configure the a VPN client tunnel:
• Configure the client policies on the gateway.
• Configure the VPN client to connect to the gateway.
Use the VPN Wizard Configure the Gateway for a Client Tunnel
1. Select VPN from the main menu and VPN Wizard from the submenu. The VPN Wizard
screen will display. To view the wizard default settings, click the VPN Wizard Default
Values link. You can modify these settings after completing the wizard.
Figure 5-8
2. Select VPN Client as your VPN tunnel connection.
3. Create a Connection Name such as "Client to GW1".
This descriptive name is not supplied to the remote VPN client; it is only for your reference.
Virtual Private Networking
ProSafe VPN Firewall 200 FVX538 Reference Manual
v1.0, January 2010
5-7