NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 57

If desired, select Enable DHCP Server, which will provide TCP/IP configuration for all
computers connected to the VPN firewall's DMZ network. If another device on your DMZ
network will be the DHCP server, or if you will manually configure all devices, leave the
Disable DHCP Server radio box selected, which is the default setting.
If the DHCP server is enabled, enter the following parameters:
• Domain Name. (Optional) The DHCP will assign the entered domain to DHCP clients.
• Starting IP Address. Specifies the first of the contiguous addresses in the IP address pool.
Any new DHCP client joining the LAN will be assigned an IP address between this
address and the Ending IP Address. The IP address 192.168.1.2 is the default start address.
• Ending IP Address. Specifies the last of the contiguous addresses in the IP address pool.
The IP address 192.168.1.100 is the default ending address.
Note: The Starting and Ending DHCP addresses should be in the same subnet as
• Primary DNS Server. (Optional) If an IP address is specified, the VPN firewall will
provide this address as the primary DNS server IP address. If no address is specified, the
VPN firewall will provide its own LAN IP address as the primary DNS server IP address.
• Secondary DNS Server. (Optional) If an IP address is specified, the VPN firewall will
provide this address as the secondary DNS server IP address.
• WINS Server. (Optional) Specifies the IP address of a local Windows NetBIOS Server if
one is present in your network.
• Lease Time. This specifies the duration for which IP addresses will be leased to clients.
If you will use a Lightweight Directory Access Protocol (LDAP) authentication server for
network-validated domain-based authentication, select Enable LDAP Information to enable
the DHCP server to provide LDAP server information. Enter the following parameters:
• LDAP Server. Specifies the name or the IP address of the device that hosts the LDAP
server.
• Search Base. Specifies the distinguished name (dn) at which to start the search, specified
as a sequence of relative distinguished names (rdn), connected with commas and without
any blank spaces. For most users, the search base is a variation of the domain name. For
example, if your domain is yourcompany.com, your search base dn might be as follows:
dc=yourcompany,dc=com.
LAN Configuration
ProSafe VPN Firewall 200 FVX538 Reference Manual
the LAN IP address of the VPN firewall (the IP Address configured in the
LAN TCP/IP Setup section).
v1.0, January 2010
3-13