6. In the Incoming (Response) Port Range fields:
a. Enter the Start Port range (1 - 65534).
b. Enter the End Port range (1 - 65534).
7. Click Add. The Port Triggering Rule will be added to the Port Triggering Rules table.
To edit or modify a rule:
1. Click Edit in the Action column opposite the rule you wish to edit. The Edit Port Triggering
Rule screen will display.
Figure 4-26
2. Modify any of the fields for this rule.
3. Click Reset to cancel any changes and return to the previous settings or click Apply to save
your modifications. Your changes will appear in the Port Triggering Rules table.
To check the status of the port triggering rules, click the Status link on the Port Triggering screen.
Figure 4-27
Firewall Protection and Content Filtering
ProSafe VPN Firewall 200 FVX538 Reference Manual
v1.0, January 2010
4-39