Traffic Metering Logs; Unicast Logs - NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual

Traffic Metering Logs

Table C-13. System Logs: Traffic Metering
Message
Explanation
Recommended Action

Unicast Logs

Table C-14. System Logs: Unicast
Message
Explanation
Recommended Action
ICMP Redirect Logs
Table C-15. System Logs: Unicast, Redirect
Message
Explanation
Recommended Action
System Logs and Error Messages
ProSafe VPN Firewall 200 FVX538 Reference Manual
Jan 23 19:03:44 [TRAFFIC_METER] TRAFFIC_METER: Monthly Limit of 10
MB has reached for WAN1._
Traffic limit to WAN1 that was set as 10Mb has been reached.
This stops all the incoming and outgoing traffic if configured like that in "When
Limit is reached" on Traffic Meter web page.
To start the traffic, restart the Traffic Limit Counter.
Nov 24 11:52:55 [FVX538] [kernel] UCAST IN=SELF OUT=WAN
SRC=192.168.10.1 DST=192.168.10.10 PROTO=UDP SPT=800
DPT=2049
• This packet (Unicast) is destined to the device from the WAN network.
• For other parameters, refer to
None
Feb 2007 22 14:36:07 [FVX538] [kernel] [LOG_PACKET] SRC=192.168.1.49
DST=192.168.1.124 PROTO=ICMP TYPE=5 CODE=1
• This packet is ICMP Redirect message sent to the router bye another router.
• For other parameters, refer to
To enable these logs, from CLI command prompt of the router, enter this
command:
monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 1
And to disable it,
monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 0
v1.0, January 2010
Table C-1.
Table C-1.
C-9