NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 100

ProSafe VPN Firewall 200 FVX538 Reference Manual
Note these restrictions with port triggering:
• Only one PC can use a port triggering application at any time.
• After a PC has finished using a port triggering application, there is a time-out period before the
application can be used by another PC. This is required because the VPN firewall cannot
detect when the application has terminated.
Note: For additional ways of allowing inbound traffic, see
Forwarding)" on page
To add a port triggering Rule:
1. Select Security from the main menu and Port Triggering from the submenu. The Port
Triggering screen will display.
Figure 4-25
2. Enter a user-defined name for this rule in the Name field.
3. From the Enable pull-down menu, indicate if the rule is enabled or disabled.
4. From the Protocol pull-down menu, select either the TCP or UDP protocol.
5. In the Outgoing (Trigger) Port Range fields:
a. Enter the Start Port range (1 - 65534).
b. Enter the End Port range (1 - 65534).
4-38
4-5.
Firewall Protection and Content Filtering
v1.0, January 2010
"Inbound Rules (Port