Monitoring Wan Ports Status - NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual

ProSafe VPN Firewall 200 FVX538 Reference Manual
To set the poll interval:
1. Click the Stop button.
2. From the Poll Interval pull-down menu, select a new interval (the minimum is 5 seconds, the
maximum is 5 minutes).
3. Click the Set Interval button.

Monitoring WAN Ports Status

You can monitor the status of both of the WAN connections, the dynamic DNS server connections,
and the DHCP server connections. To monitor the status of the WAN ports:
1. Select Network Configuration from the main menu and WAN Settings from the submenu.
The WAN1 ISP Settings screen will display.
2. Click the WAN Status link in the upper right-hand section of the screen. The Connection
Status popup window displays a status report on the WAN1 port.
Figure 6-16
To get a status report on the WAN2 port, click the WAN2 ISP Settings tab, and then click the
WAN Status link.
6-32 VPN Firewall and Network Management
v1.0, January 2010