NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 73

3. Click Apply to save your changes and reset the fields on this screen. The new rule will be
listed in the Outbound Services table.
LAN WAN Inbound Services Rules
This Inbound Services table lists all existing rules for inbound traffic. If you have not defined any
rules, no rules will be listed. By default, all inbound traffic is blocked. Remember that allowing
inbound services opens holes in your VPN firewall. Only enable those ports that are necessary for
your network.
To create a new LAN WAN inbound service rule:
1. In the LAN WAN Rules screen, click Add under the Inbound Services table. The Add LAN
WAN Inbound Service screen will display.
Figure 4-4
2. Configure the parameters based on the descriptions in
3. Click Apply to save your changes and reset the fields on this screen. The new rule will be
listed in the Inbound Services table.
Firewall Protection and Content Filtering
ProSafe VPN Firewall 200 FVX538 Reference Manual
Table 4-3 on page
v1.0, January 2010
4-6.
4-11