NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 112

ProSafe VPN Firewall 200 FVX538 Reference Manual
Fill in the other options according to the instructions below.
• Under Connection Security, verify that the Secure radio button is selected.
• From the ID Type pull-down menu, choose IP Subnet.
• Enter the LAN IP Subnet Address and Subnet Mask of the VPN firewall LAN; in this
example, we are using 192.168.2.0.
• Check the Use checkbox and choose Secure Gateway Tunnel from the pull-down menu.
• From the first ID Type pull-down menus, choose Domain Name. Enter the FQDN
address which the VPN firewall VPN Wizard provided; in this example, we are using
gw1_local.com.
• From the second ID Type pull-down menu, choose Gateway IP Address and enter the
WAN IP Gateway address of the VPN firewall; in this example, we are using
21.208.216.81.
3. In the left frame, click My Identity. Fill in the options according to the instructions below.
Figure 5-12
• From the Select Certificate pull-down menu, choose None.
• Click Pre-Shared Key to enter the key you provided in the VPN Wizard; in this example,
we are using "r3m0+eC1ient."
• From the ID Type pull-down menu, choose Domain Name.
• Leave Virtual Adapter disabled.
• In Network Adapter select the adapter you will use; the IP address of the selected adapter
will display.
4. Verify the Security Policy settings; no changes are needed.
5-10
v1.0, January 2010
Virtual Private Networking