Ipsec Restart; Wan Status - NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual

ProSafe VPN Firewall 200 FVX538 Reference Manual

IPSec Restart

This logging is always done.
Table C-7. System Logs: IPSec Restart
Message
Explanation
Recommended Action

WAN Status

This section describes the logs generated by the WAN component. If there are two ISP links for
Internet connectivity, the VPN firewall can be configured either in Auto Rollover mode or Load
Balancing mode.
Load Balancing
When the WAN mode is configured for Load Balancing, both the WAN ports are active
simultaneously and the traffic is balanced between them. If one WAN link goes down, all the
traffic is diverted to the WAN link that is active.
This section describes the logs generated when the WAN mode is set to Load Balancing.
Table C-8. System Logs: WAN Status, Load Balancing
Message
Explanation
Recommended Action
C-4
Jan 23 16:20:44 [FVX538] [wand] [IPSEC] IPSEC Restarted
Log generated when the IPSEC is restarted.
This log is logged when IPSEC restarts after applying any changes in the
configuration.
None
Dec 1 12:11:27 [FVX538] [wand] [LBFO] Restarting WAN1_
Dec 1 12:11:31 [FVX538] [wand] [LBFO] Restarting WAN2_
Dec 1 12:11:35 [FVX538] [wand] [LBFO] WAN1(UP), WAN2(UP)_
Dec 1 12:24:12 [FVX538] [wand] [LBFO] WAN1(UP), WAN2(DOWN)_
Dec 1 12:29:43 [FVX538] [wand] [LBFO] Restarting WAN2_
Dec 1 12:29:47 [FVX538] [wand] [LBFO] WAN1(UP), WAN2(DOWN)_
Message 1 and Message 2 indicate that both the WANs are restarted.
Message 3: This message shows that both the WANs are up and the traffic is
balanced between the two WAN interfaces.
Message 4: This message shows that one of the WAN links is down. At this
point, all the traffic is directed through the WAN which is up
None
v1.0, January 2010
System Logs and Error Messages