NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 111

Follow these steps to configure your VPN client.
1. Right-click on the VPN client icon in your Windows toolbar, choose Security Policy Editor,
and verify that the Options > Secure > Specified Connections selection is enabled.
Figure 5-10
2. In the upper left of the Policy Editor window, click the New Document icon (the first on the
left) to open a New Connection. Give the New Connection a name; in this example, we are
using gw1.
Figure 5-11
Virtual Private Networking
ProSafe VPN Firewall 200 FVX538 Reference Manual
v1.0, January 2010
5-9