NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 41

Figure 2-6
2. Click the tab of the Dynamic DNS Service you want to enable. Each DNS service provider
requires registration and you then configure its parameters on the corresponding screen.
3. Access the website of one of the DDNS service providers and set up an account. A link to each
DDNS provider is to the right of the tabs.
4. After setting up your account, return to the Dynamic DNS Configuration screen and fill in the
required fields for the DDNS service you selected:
a. In the Host and Domain Name field, enter the entire FQDN name that your dynamic DNS
service provider gave you (for example: <yourname>.dyndns.org).
b. Enter the user name, user e-mail address, or account name requested by the DDNS Service
to identify you when logging into your DDNS account.
c. Enter the Password, or User Key, for your DDNS account.
Connecting the VPN Firewall to the Internet
ProSafe VPN Firewall 200 FVX538 Reference Manual
v1.0, January 2010
2-15