NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Reference Manual page 48

Prosafe vpn firewall 200
Hide thumbs Also See for FVX538v2 - ProSafe VPN Firewall Dual WAN:
Table of Contents

Advertisement

ProSafe VPN Firewall 200 FVX538 Reference Manual
Note: If you change the LAN IP address of the VPN firewall while connected
IP Subnet Mask. The subnet mask specifies the network number portion of an IP address.
Your VPN firewall will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use 255.255.255.0 as the subnet
mask. (Always make sure that the LAN Port IP address and DMZ port IP address are in
different subnets.)
3. In the DHCP section, select Disable DHCP Server, Enable DHCP Server, or DHCP Relay.
By default, the VPN firewall will function as a DHCP server, providing TCP/IP configuration
settings for all computers connected to the VPN firewall's LAN. If another device on your
network will be the DHCP server, or if you will manually configure all devices, click Disable
DHCP Server. If the VPN firewall will function as a DHCP relay agent, select DHCP Relay
and enter the IP address of the DHCP relay gateway in the Relay Gateway field.
If the DHCP server is enabled, enter the following parameters:
Domain Name. (Optional) The DHCP will assign the entered domain to DHCP clients.
Starting IP Address. Specifies the first of the contiguous addresses in the IP address pool.
Any new DHCP client joining the LAN will be assigned an IP address between this
address and the Ending IP Address. The IP address 192.168.1.2 is the default start address.
Ending IP Address. Specifies the last of the contiguous addresses in the IP address pool.
The IP address 192.168.1.100 is the default ending address.
Note: The starting and ending DHCP addresses should be in the same subnet as
Primary DNS Server. (Optional) If an IP address is specified, the VPN firewall will
provide this address as the primary DNS server IP address. If no address is specified, the
VPN firewall will provide its own LAN IP address as the primary DNS server IP address.
Secondary DNS Server. (Optional) If an IP address is specified, the VPN firewall will
provide this address as the secondary DNS server IP address.
3-4
through the browser, you will be disconnected. You must then open a new
connection to the new IP address and log in again. For example, if you
change the default IP address 192.168.1.1 to 10.0.0.1, you must now enter
https://10.0.0.1 in your browser to reconnect to the Web Configuration
Manager.
the LAN IP address of the VPN firewall (the IP address that is configured
in the LAN TCP/IP Setup section of the LAN Setup screen).
v1.0, January 2010
LAN Configuration

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fvx538

Table of Contents