Configuration-Complete Parameter; Toconfig; Parameters For Configuration Method And Encryption - Cisco ATA 186 Administrator's Manual

Configuration-Complete Parameter

Range
Maximum nine characters
Default
0
Voice Configuration Menu Access Code
7387277
Related Parameters
OpFlags, page
Configuration-Complete Parameter
This section contains only one parameter—ToConfig.

ToConfig

Description
After you configure the Cisco ATA, set the parameter to 0, or the Cisco ATA will unnecessarily contact
the TFTP server.
Value Type
Boolean
Range
0 or 1
Default
1—This indicates that the operating parameters have not previously been set.
Voice Configuration Menu Access Code
80001

Parameters for Configuration Method and Encryption

This section describes parameters for instructing the Cisco ATA about how to locate its TFTP server and
how to encrypt its configuration file:
•
•
•
•
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (H.323)
5-4
5-33—Bit 7
UseTFTP, page 5-5
TftpURL, page 5-5
CfgInterval, page 5-6
EncryptKey, page 5-6
Chapter 5 Parameters and Defaults
OL-4008-01