Launching Object Management Dialogs - Cisco VS-C6509E-S720-10G User Manual

Chapter 3 Getting Started

Launching Object Management Dialogs

Figure 3-5 View of Commissioned Object
Note If you have installed hardware that is not supported by C65/76M, the module image will contain a "?"
in the hardware view.
Launching Object Management Dialogs
After all the objects in the network element are in the normal state, dialog boxes can be opened to
perform management operations on the network element.
To launch the management dialog box of a C65/76M object, right click its parent object in the Map
Viewer application or the object itself in the containment view. Select the option to open the object's
dialog box from the pop-up menu. Refer to the "C65/76M Objects and Interfaces" section on page 2-3
for descriptions of the object hierarchies.
For example, to open the EtherChannel Dialog, right-click on the Software object and choose Open
EtherChannel Dialog from the pop-up menu, as shown in Figure 3-6.
Cisco 6500/7600 Series Manager User Guide
3-10