Cisco VS-C6509E-S720-10G User Manual page 325

Chapter 6 Logical Object Dialog Boxes
• Max. VLAN Storage—Estimate of the maximum number of VLANs about which the local system
can recover complete VTP information after a reboot. If the number of defined VLANs is greater
than this value, then the system cannot act as a VTP Server. For a device that has no means to
calculate the estimated number, this value is -1. This attribute is read-only.
Pruning—An indication of whether VTP pruning is enabled or disabled in this management
•
domain. This value can only be modified by local/network management when the Mode is server.
Version—The current version of the VTP that is in use by this management domain.
•
Update button—Updates any configuration changes made in this dialog box (see
•
Note The Update button must be used to save configuration changes to the VTP dialog box. The save icon has
been removed from the icon bar from the top of the dialog box.
Note The Mode must be set to server or transparent in order to save all configuration changes (Mode, Domain
Name, Pruning, Version) to the VTP dialog box.
Note If the Mode is not set to server and the Update button is used, a message is displayed indicating that
changes to the "Pruning" and "Version in Use" attributes are ignored
only set when the Mode is set to server.
Figure 6-28 Update Button Selected in Client Mode Message
C6576M VTP Dialog Box
(Figure 6-28). These values can
Cisco 6500/7600 Series Manager User Guide
Figure 6-28).
6-35