Cisco VS-C6509E-S720-10G User Manual page 440

C65/76M Alarms
Port Adapters
Table 8-8
Table 8-8
State
mismatched
normal
normallostcomms "C6576M Port Adapter is in the lostcomms
performance
perflostcomms
Software
Table 8-9
Table 8-9
State
discovery
discoverylostcomms "C6576M Software is in the
normal
normallostcomms
Because the Software object cannot enter the lostcomms state independently of the Network Element
Note
object, no alarm is raised when the Software object enters the lostcomms state.
Cisco 6500/7600 Series Manager User Guide
8-12
describes the Port Adapters state alarms.
Port Adapters State Alarms
Description
"C6576M Port Adapter is in the mismatched
state. The discovered SFM card is different
from the pre-deployed or previously
discovered type."
"C6576M Port Adapter is in the normal state." Normal
state. Network connectivity to the supervisor
card is lost."
"C6576M Port Adapter is in the performance
state."
"C6576M Port Adapter is in the lostcomms
state. Network connectivity to the supervisor
card is lost."
describes the Software object state alarms.
Software Object State Alarms
Description
"C6576M Software is in the discovery
state. Discovery of the logical software
objects is being performed."
discoverylostcomms state. Network
connectivity to the switch has been lost
during discovery or the IOS passwords
are incorrect."
"C6576M Software object is in the
normal state."
"C6576M Software object is in the
lostcomms state. Network connectivity to
the supervisor card is lost."
Chapter 8 Alarms and Alarm Management
Severity Alarms Cleared
Major performance
lostcomms
performance
lostcomm
Normal performance
lostcomms
Severity Alarms Cleared
Informational normal
discovery
Normal discovery