Additional Notes Tab - Cisco VS-C6509E-S720-10G User Manual

C6576M ACL Configuration Dialog Box
•
•
•
•
•
•
•
Status Field
The Status display-only field located at the bottom of the window indicates the current state of the
object. This field has the following values:
•
•
•

Additional Notes Tab

Figure 6-91
Figure 6-91 Additional Notes Tab of the C6576M ACL Configure Dialog Box
Cisco 6500/7600 Series Manager User Guide
6-116
Source Port—The decimal number or name of a source TCP or UDP port. TCP port names can only
be used when filtering TCP. UDP port names can only be used when filtering UDP.
Destination IP—Number of the network or host to which the packet is being sent.
Destination Mask—Bitmask used in combination with Destination IP to specify a host address or a
range of addresses to apply filter.
Destination Operand—Comparison operator for destination TCP or UDP ports.
Destination Port—The decimal number or name of a destination TCP or UDP port.
Remark—Comment that describes the access list entry, up to 100 characters long.
Add Filter button—Appends a permit or deny filter to an ACL.
decommissioned—CEMF is not actively monitoring the object attributes.
normal—Presence polling of the object.
normallostcomms—CEMF has lost communication with the device from the normal state.
shows the Additional Notes tab of the C6576M ACL dialog box.
Chapter 6 Logical Object Dialog Boxes