Cisco VS-C6509E-S720-10G User Manual page 217

Chapter 5 Physical Object Dialog Boxes
ATM/SONET Area
The ATM/SONET area of the C6576M ATM SONET Interface dialog box provides the following
information:
•
•
•
Performance Logging Area
The Performance Logging area of the C6576M ATM T3 Interface dialog box contains buttons to enable
data logging of all the interface attributes of the interface:
•
•
Note The logged data is available to you through the CEMF Performance Manager. Refer to the Cisco Element
Management Framework User Guide for more information about the Performance Manager.
SONET Section Status—Status of the SONET Section. This status may indicate multiple
simultaneous defects. This has one of the following values:
sonetSectionNoDefect—No defect.
–
sonetSectionLOS—Error condition, Loss Of Signal.
–
sonetSectionLOF—Error condition, Loss Of Frame.
–
SONET Line Status—Status of the SONET Line. This status may indicate multiple simultaneous
defects. This can have one of the following values:
– sonetLineNoDefect—No defect.
sonetLineAIS—Line defect Alarm Indication Signal.
–
– sonetLineRDI—Line defect Remote Defect Indication.
SONET Path Status—Status of the SONET Path. This status may indicate multiple simultaneous
defects. This can have one of the following values:
– sonetPathNoDefect—No defect.
– sonetPathSTSLOP—STS-Path Loss of Pointer.
sonetPathSTSAIS—STS-Path Alarm Indication Signal.
–
sonetPathSTSRDI—STS-Path Remote Defect Indication.
–
sonetPathUnequipped—Unequipped.
–
sonetPathSignalLabelMismatch—Signal Label Mismatch.
–
Start—Turns on performance data logging.
Stop—Turns off performance data logging.
C6576M ATM SONET Interface Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-103