Named Aggregate Tab - Cisco VS-C6509E-S720-10G User Manual

Chapter 6 Logical Object Dialog Boxes

Named Aggregate Tab

Figure 6-96
Figure 6-96 Named Aggregate Tab of C6576M QoS Dialog Box
Named Aggregate Area
The Named Aggregate area of the C6576M QoS dialog box describes the named aggregate policers
defined globally on the device. This tab (not supported in Hybrid OS) contains the following information
attributes:
•
•
•
•
The Max. Burst feature is not supported in 12.1(8a)E and earlier.
Note
Conform Action Area
The Conform Action area of the C6576M QoS dialog box describes the named aggregate policers
defined globally on the device. This tab contains the following information:
shows the Named Aggregate tab of the C6576M QoS dialog box.
Named Policers table—Lists by aggregate name the named aggregate policers defined globally on
the device. This table displays the following:
Aggregate Name—Unique identifier of a named aggregate policer on the managed device.
–
Rate—Maximum transmission rate (in bits per second) to enforce against policed traffic.
Burst—Normal burst size in bytes to enforce against policed traffic.
Max. Burst—Maximum burst size in bytes to enforce against policed traffic. A value of 0 indicates
that a maximum burst size has not been specified.
C6576M QoS Dialog Box
Cisco 6500/7600 Series Manager User Guide
6-121