Chapter 5
Physical Object Dialog Boxes
•
•
•
Note
•
By default, all interfaces are configured as IS-IS Circuit-type Level 1-2.
Note
Additional Notes Tab
Figure 5-45
Figure 5-45 Additional Notes Tab of the C6576M ATM T3 Interface Dialog Box
Notes Area
The Notes area is a text box that allows you to type in additional notes for the ATM T3 Interface.
Level 2 Metric—Cost of the interface for IS-IS level 2 (inter-area) route calculation.
Level 2 Priority—Level 2 priority.
Enable button—Enables IS-IS routing on the interface.
To enable IS-IS on an interface, the user must specify an IS-IS routing process that is already
deployed on the device. If the process does not exist, the action will fail.
Disable button—Disables IS-IS routing on the interface.
shows the Additional Notes tab of the C6576M ATM T3 Interface dialog box.
C6576M ATM T3 Interface Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-89