Cisco VS-C6509E-S720-10G User Manual page 415

Chapter 6 Logical Object Dialog Boxes
• Match DSCP—Specifies DSCP values to match. Up to eight values may be specified. If no values
are specified, DSCP matching criteria is disabled. This attribute may only have a value if the Type
attribute is ethernet and both Match IP Precedence and Match ACL attributes are nil.
Match ACL—Identifier of a named or numbered (standard or extended) ACL. In no identifier is
•
specified, the ACL matching criteria is disabled. The named or numbered ACL must be configured
on the device before this class map can be associated with an interface. The device will not detect
an invalid class map until you associate the class map with an Ethernet interface. This attribute may
only have a value if the Type attribute is ethernet and both Match IP Precedence and Match DSCP
attributes are nil.
• Add New button—Launches a subdialog box, shown in
managed device. The subdialog box contains the following attribute:
–
–
Figure 6-99 Add Class Map Subdialog Box of the C6576M QoS Dialog Box
Remove button—Deletes from the managed device one or more class maps selected in the Class
•
Map Table. The C65/76M will only allow an Ethernet class map to be removed.
Class Map Name—Unique identifier of the class map to be added on the device.
Add button—Creates the class map specified by the Class Map Name attribute.
C6576M QoS Dialog Box
Figure 6-99, to create a class map on the
Cisco 6500/7600 Series Manager User Guide
6-125