Cisco VS-C6509E-S720-10G User Manual page 216

C6576M ATM SONET Interface Dialog Box
Interface Status Area
The Status area of the C6576M ATM SONET Interface dialog box provides the following information
to describe the general characteristics of the interface:
•
•
•
•
•
•
•
Cisco 6500/7600 Series Manager User Guide
5-102
Description—Comment or a description to help you remember what is attached to this interface. The
description is only put in the configuration to help you remember what specific interfaces are used
for.
Index—String index of the interface. This attribute is read-only.
Operational Status—The current operational state of the interface. This attribute is read-only. This
attribute has one of the following values:
– testing—Indicates that no operational packets can be passed.
unknown
–
down
–
up
–
– dormant—Interface is waiting for external actions (such as a serial line waiting for an incoming
connection)
– notPresent—Interface has missing (typically, hardware) components.
– lowerLayerDown—The interface in the lower layer is down.
Administrative Status—The desired state of the interface. This attribute has one of the following
values:
– testing (read-only)—Indicates that no operational packets can be passed.
– up
– down
Last Change—The value (in seconds) of sysUpTime at the time the interface entered its current
operational state. If the current state was entered before the last reinitialization of the local network
management subsystem, then this object contains a zero value. This attribute is read-only.
Connector Present—Indication if a cable is connected to the interface. If the ifAdminStatus is down,
then this value cannot be determined and an "unknown" message is given. This attribute is
read-only. This attribute can have the following values:
– yes—Cable is connected to the interface.
– no—Cable is not connected to the interface.
– unknown—Cannot determine if a cable is connected to the interface.
Number of Resets—Number of times the interface internally reset. This attribute is read-only.
Chapter 5 Physical Object Dialog Boxes