Performance Tab - Cisco VS-C6509E-S720-10G User Manual

Chapter 5 Physical Object Dialog Boxes
SONET Area
The SONET area contains the following information:
•
•
•

Performance Tab

Figure 5-74
in this tab are read-only.
Figure 5-74 Performance Tab of the C6576M OSM POS Interface Dialog Box
SONET Overhead J0 Byte—Value of the SONET overhead section trace byte. A value of 0x10 is
for interoperability with some Synchronous Digital Hierarchy (SDH) devices in Japan. This
attribute is read-only.
SONET Overhead C2 Byte—Value of the SONET overhead path signal identifier. This attribute is
read-only. These are possible values:
0xCF = PPP or HDLC
–
0x13 = ATM
–
SONET Overhead S1 S0 Bits—Value of the SONET overhead S1 & S0 bits. These bits are part of
the payload pointer byte. This attribute is read-only. These are possible values:
0 = OC-3c
–
2 = AU-4
–
shows the Performance tab of the C6576M OSM POS Interface dialog box. All the attributes
C6576M OSM POS Interface Dialog Box
Cisco 6500/7600 Series Manager User Guide
5-143