C6576M OSM Serial Subinterface Dialog Box
SONET Path Header (J1) Area
The SONET Path Header (J1) area contains the following information:
•
•
•
•
•
Note
Cisco 6500/7600 Series Manager User Guide
5-154
Expected Size—Maximum length of the expected receive SONET Path overhead message in bytes.
Transmit Size—Maximum length of the transmitting SONET Path overhead message in bytes.
Expected Label—The expected receive SONET Path overhead message. If the expected label is
longer than the expected size, it will be truncated.
Transmit Label—Transmitting SONET Path overhead message. If the transmitting label is longer
than the transmitting size, it will be truncated.
Modify SONET Path Header (J1) button—Launches a subdialog box to modify the expected receive
and transmit SONET Path overhead message.
button. The following items are displayed in the subdialog box:
Expected Size
–
Transmit Size
–
–
Expected Label
–
Transmit Label
–
Modify button—Sets the specified values of the attributes given in the subdialog box.
In 12.1(11b)E and later the values for the Expected Size and the Transmit Size should be the
same since the Tx and Rx message sizes cannot be independently configured. If the received
values are different, the J1 Path Overhead message size will be set to the larger of the two values.
Chapter 5
Figure 5-80
shows the subdialog box launched by this
Physical Object Dialog Boxes