Cisco VS-C6509E-S720-10G User Manual page 423

Chapter 6 Logical Object Dialog Boxes
• Microflow Enabled—Indicates whether or not a Microflow policer is defined for the policy map
class. This enables QoS policing against Layer 3 switched traffic flows. This attribute may have
one of the following values:
–
–
• Rate—Maximum transmission rate, in bits per second, to enforce against policed traffic. This value
is mandatory when defining an explicit policer. A value of 0 is returned on read if an explicit policer
is not defined for the policy map class.
Burst—Normal burst size, in bytes, to enforce against policed traffic. This value is mandatory when
•
defining an explicit policer. A value of 0 is returned on read if an explicit policer is not defined for
the policy map class.
Exceed Action—Action to be taken when policed traffic exceeds QoS parameters.
•
–
–
–
–
Conform Action Subarea
Conform Action—Action to be taken when Policed traffic conforms to QoS parameters. This
•
attribute may have one of the following values:
–
–
–
–
–
Set DSCP—DSCP value assigned to packets of conforming ingress traffic before transmitting on
•
egress interfaces.This value is only relevant and will only be set in the running configuration of the
device if the Policy Conform Action is Set DSCP. A value of 0 is returned on read if an explicit
policer is not defined for the policy map class or the conform action is not Set DSCP.
Set IP Precedence—IP Precedence value assigned to packets of conforming ingress traffic before
•
transmitting on egress interfaces. This value is only relevant and will only be set in the running
configuration of the device if the Policy Conform Action is Set Precedence. A value of 0 is returned
on read if an explicit policer is not defined for the policy map class or the conform action is not Set
Precedence.
true
false
Drop—Drops packet.
Policed DSCP Transmit—Changes the DSCP as per the policed DSCP map before transmitting.
Transmit—Transmits packet.
A value of none (0) is returned on read if an explicit policer is not defined for the policy map
class.
Drop—Drops packet
Transmit—Transmits packet
Set DSCP—Assigns DSCP value to packet before it is transmitted.
Set Precedence—Assigns IP Precedence value to packet before it is transmitted.
A value of none (0) is returned on read if an explicit policer is not defined for the policy map
class.
C6576M QoS Policy Map Dialog Box
Cisco 6500/7600 Series Manager User Guide
6-133