Applying A Network Element Profile; Syslog Profile; Creating A Syslog Profile - Cisco VS-C6509E-S720-10G User Manual

Chapter 7 Profiles
Step 4 Select the profile from the profile list.
Step 5 Specify the values for the profile attributes.
Step 6 Save your changes by clicking the Save tool from the toolbar or choosing the File > Save menu bar
option.

Applying a Network Element Profile

To apply a Network Element Profile, follow these steps:
Step 1 Open the Network Element dialog box for the Network Element object to which you want to apply the
profile.
Step 2 Choose Edit > Apply Profile and the name of the profile you want to apply from the menu bar. The
profile is applied and the Network Element attributes are changed to match that of the profile.

Syslog Profile

The Syslog profile is used to create a standard template for the Syslog objects listed below. These objects
are discussed in detail in the
•
•
•

Creating a Syslog Profile

To create a Syslog profile, follow these steps:
Launch the Syslog Profile dialog box by choosing Open Syslog Profile from the pop-up menu of the
Step 1
Syslog object or Software object. The Syslog Configuration Profile dialog box, shown in
appears.
"C6576M Syslog Dialog Box" section on page
Max. Syslog Severity
Max. Table Entries
Enable Notification
6-42.
Cisco 6500/7600 Series Manager User Guide
Syslog Profile
Figure 7-2,
7-3