Cisco VS-C6509E-S720-10G User Manual page 138

C6576M Ethernet Module Dialog Box
•
•
•
•
•
•
Performance Logging Area
The Performance Logging area of the C6576M Ethernet Module dialog box allows users to turn on
performance data logging for all interfaces on the module:
•
•
See the
attributes that are polled for performance data.
The logged data is available to you through the CEMF Performance Manager. Refer to the Cisco Element
Note
Management Framework User Guide for more information about the Performance Manager.
Actions Area
The Actions area of the C6576M Ethernet Module dialog box provides the following information:
•
•
Cisco 6500/7600 Series Manager User Guide
5-24
– WS-X6324-100FX-SM
– WS-X6324-100FX-MM
– WS-X6248-RJ-45
– WS-X6248-TEL
WS-X6248-A-TEL
–
WS-X6348-RJ-45
–
WS-X6348-RJ-21
–
WS-X6516-GE-TX
–
– WS-X6502-10GE
Serial Number—The serial number of the module.
Number of Ports—The total number of ports on the module.
Daughter Card—The type of daughter card installed on the module. The possible values of this
attribute are:
none—No card installed.
–
WS-F6KDFC—Distributed Forwarding Card for WS-X6516-GBIC module.
–
WS-F6KVPWR—Inline Power Card.
–
unknown—Card installed is not one of the above.
–
Hardware Version—The hardware version on the module.
Software Version—The software version on the module.
Firmware Version—The firmware version on the module.
Start—Turn performance data logging on for all interfaces.
Stop—Turn performance data logging off for all interfaces.
"C6576M Ethernet Interface Dialog Box" section on page 5-27
Commission—This button is used to commission the object manually. This can only be done if the
object is in a decommissioned state. Clicking this button commissions all interfaces.
Decommission—This button is used to decommission the object manually. In the decommissioned
state, the properties of the object are not monitored. As a result, data displayed in the configuration
window is not guaranteed to be current. Clicking this button decommissions all interfaces.
Chapter 5 Physical Object Dialog Boxes
for a list of the interface