Park And Unpark A Call With One Line Key; Call Park Extension And Status - Cisco 6800 Series User Manual

Calls
You can also enter Pound (#) to retrieve the parked call. If you retrieve a call parked on your own phone, you
may not need to enter a number.

Park and Unpark a Call with One Line Key

If your administrator has configured a Busy Lamp Field (line status) list with the prk function for you, you
can park and unpark active calls. See
icons.
This feature doesn't apply to phone Cisco IP Phone 7811.
Before you begin
Activate or Deactivate Monitoring of the BLF List, on page 21
Procedure
Step 1
Press the line key that monitors the user to park an active call.
Step 2 To unpark a call, do one of three things:
• Press the monitored user that displays the parked call.
• Press the extension line key, then press the monitored user that displays the parked call.
• Use the navigation button to focus on the extension line key, then press the monitored user that displays

Call Park Extension and Status

Your administrator can configure call park to support parking calls against dedicated call park extensions.
These extensions are used only for call park and are not used for call routing.
Figure 15: Call Park in Call Park Extensions
the parked call.
Coworker Line Status, on page 20
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
Park and Unpark a Call with One Line Key
for the idle and Parked call
71