Broadsoft Directory; Search For A Contact In Your Broadsoft Directory - Cisco 6800 Series User Manual

Contacts
Step 5
In the Webex directory settings screen, edit the name in the Directory name box. The name you enter
displays as the Webex directory name under Directory list.
Step 6 Click Save.

Broadsoft Directory

You can search and view your personal, group, and enterprise contacts in your Broadsoft Directory, which
makes it easier to give them a call. Your administrator configures the Broadsoft Directory in your phone. This
application feature uses BroadSoft's Extended Services Interface (XSI).

Search for a Contact in Your BroadSoft Directory

Before you begin
• Your administrator enables the BroadSoft XSI services.
• Your administrator enables the BroadSoft directories and sets up the directories properly.
• Your administrator enables the Browse Mode for the directories.
Procedure
Step 1
Do one of the following actions:
• 6821: Press Applications
• Other phones in 6800 series: Press Contacts
Step 2 Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3
Select a BroadSoft directory. The default names are:
• Enterprise
• Group
• Personal
• Enterprise Common
• Group Common
Note
After you enter the directory, wait until the preload operation is complete. You can press Cancel to stop the
preload operation.
Step 4
Press Option, then select Search.
When this mode is enabled, a preload operation will start automatically to retrieve all the contacts from
the directory.
When your administrator disables the directory individual mode, the phone only displays
BroadSoft directory.
, and select Directories.
.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
Broadsoft Directory
95