Cisco Headset 531 And 532 - Cisco 6800 Series User Manual

Cisco Headset 531 and 532

Figure 16: Cisco Headset 521 and 522 Controller
The following table describes the Cisco Headset 521 and 522 controller buttons.
Table 20: Cisco Headset 521 and 522 Controller Buttons
Number
1
2
3
Cisco Headset 531 and 532
The Cisco Headset 530 Series are two headsets that are developed for Cisco products and services. The 531
headset features a single earpiece, and offers lightweight comfort. The 532 headset features two earpieces for
use in a noisy environment or busy office.
The Cisco Headset 531 and 532 use one of two connectors with the Cisco IP Phone 6871 Multiplatform
Phones:
• RJ9 connector–Use it with Cisco IP Phones that have a headset port.
• USB headset adapter– Provides enhanced call control.
The Cisco Headset USB Adapter is available for use with the Cisco Headset 531 and 532. With the adapter,
you can test your headset, and customize your bass and treble, gain or microphone volume, and sidetone or
feedback settings. The adapter also retains your settings if you switch between phones.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
172
Name Description
Toggle the microphone on and off.
Mute button
Adjust the volume on your headset.
Volume button (
and )
Use to manage calls:
Call button
• Press once to answer an incoming call.
• Press and hold for 2 seconds to end a call.
• Press twice to reject an incoming call.
• Press once to put an active call on hold. Press again to
retrieve a call from hold.
Accessories