Simple Motion Module Setting; System Configuration - Mitsubishi Electric FATEC MELSEC iQ-R Training Manual

6.5

Simple Motion Module Setting

Set various parameters from the Simple Motion Module setting tool to use the positioning
functions of RD77MS4.
6.5.1

System configuration

Double-click!
Double-click!
Click!
Go to next page
(1) Start the Simple Motion Module setting tool.
In the [Navigation window], select [Parameter]
→ [Module Information] → [0000:RD77MS4],
and double-click [Simple Motion Module
Setting].
(2) The Simple Motion Module setting tool will start.
The system configuration window appears. Set
the system configuration.
Double-click an Axis #1 (d01).
(3) The Amplifier Setting [Axis #1] dialog box
appears. Set the data as shown below, and
click the button.
OK
Servo Amplifier Series: MR-J4(W)-B (-RJ)
Amplifier Operation Mode: Standard
6-6