6.3.2
Demonstration machine operation panel
Demonstration machine operation panel is as follows.
[Start screen]
[Screen switching menu]
[Positioning operation screen]
Related positioning controls
・Standby point positioning (Refer to Section 6.8.4)
・Point selection positioning (Refer to Section 6.8.5)
・Address indirect specification positioning (Refer to Section 6.8.6)
・Speed change (Refer to Section 6.8.7)
・Continuous positioning (1) (Refer to Appendix 2.3.2.)
・Continuous positioning (2) (Refer to Appendix 2.3.3.)
・Teaching, teaching playback (Refer to Appendix 2.3.4.)
・Fixed-feed, fixed-feed stepping (Refer to Appendix 2.3.5.)
[Course selection screen]
[JOG•home position return operation panel]
Related positioning controls
・JOG operation (Refer to Section 6.8.2)
・Home position return (Refer to Section 6.8.2)
[Error display screen]
The error display screen is common to all screens.
This screen is displayed by touching Error screen
on each screen.
Current errors can be checked and reset.
(Refer to Section 6.8.8)
6-4