Writing To The Rd77Ms; Saving The Project - Mitsubishi Electric FATEC MELSEC iQ-R Training Manual

5.4

Writing to the RD77MS

The set parameters are written to RD77MS.
5.4.1

Saving the project

(2) Input!
(1) Terminate the Simple Motion Module setting
Click!
Click!
(2) The Save As window appears. Input the file
(3) Click the
(3) Click!
5-21
tool.
Click [Project] → [Exit] on the Simple Motion
Module setting tool menu.
Click [Project] → [Save As...] on the GX Works3
menu.
name.
button, and the project will be
Save
newly saved.