Web Method - GE DS-SD4-1 Reference Manual

Determining Current
Firmware Version
Web
Reprogramming
MDS 05-4670A01, Rev. E
Three methods can be used to load new firmware into the radio: Web
reprogramming, TFTP, and Serial Transfer. Firmware reprogram-
ming is best handled using the web-based Device Manager. Instructions
for these methods of transfer are given below, beginning with Web pro-
gramming.

Web Method

This screen shows Bootloader version information and indicates which
firmware image (1 or 2) is currently active, as well as the firmware ver-
sion of each image. The information on this screen is read-only.
• —Clicking this button updates the displayed information
Refresh
on demand.
• —Initiates automatic updating of the information. A time (in
Auto
seconds) may be entered in the box provided, to specify how often
the display is updated.
NOTE: The latest firmware version for this product can be obtained at
www.gemds.com.
In the space provided, enter the
then click to start the file upload process. Do not click away
Program
from this page until the upload has finished processing.
SD Series Reference Manual (x710 Mode)
file to reprogram into this radio,
*.mpk
49