Error Messages During File Transfers - GE DS-SD4-1 Reference Manual

MDS 05-4670A01, Rev. E
NOTE: If a firmware installation fails, the radio is left with the original
active image intact, and the inactive image will be unusable.
Reprogramming should be attempted again.

Error Messages During File Transfers

It is possible to encounter errors during a file transfer. In most cases
errors can be quickly corrected by referring to Table 16.
Table 16. Common Errors During TFTP Transfer
Error Message
Invalid File Type
File not found
Invalid file path
Timeout
Bad CRC
Version String Mismatch
SD Series Reference Manual (x710 Mode)
Likely Cause/Corrective Action
Indicates that the file is not a valid firmware
file. Locate proper file and re-load.
Invalid or non-existent filename on TFTP
server
Invalid or non-existent file path to TFTP server
TFTP transfer time expired. Increase the
timeout value.
Cyclic Redundancy Check reporting a
corrupted file. Attempt to re-load, or use a
different file.
Invalid file detected. Attempt to re-load, or use
a different file.
54