Delete Zone; View Zone Points - Honeywell SILENT KNIGHT RPS-2000 Installation And Operation Manual

this zone can now be programmed through the Zone Edit sub-menu. Up to 999 zones can
be used per panel.
9.3.3

Delete Zone

To delete a zone, follow these steps:
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select for Panel Programming.
7
Display reads:
3. Press to enter zone menu.
2
4. Press to delete a zone.
3
A warning screen will display. If you want to proceed with deleting the zone, select Yes.
To cancel, select No.
9.3.4

View Zone Points

To view the points in a zone, follow these steps:
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select for Panel Programming.
7
Display reads:
3. Press to enter zone menu.
2
4. Press to view zone points.
4
5. Enter the number of the zone you wish to view, then press
151430
Initializing
Please wait . . .
Initializing
Please wait . . .
Zone Number
Figure 9-3 View Zone Points Screen
firealarmresources.com
Programming
.
Zone Name
9-9